TOTALLY DEODORIZED
SOLVENTS DEGREASERS
OPTIMISED FLASHPOINT/EVAPORATION SPEED RATIO
CERTIFIED NSF K1 FOR FOODSTUFFS INDUSTRIES (IAA)
ENCLOSED SPACES, FITTING AND ASSEMBLY WORKSHOPS
SOLVENT DEGREASER FOR SOLVENT PARTS WASHERS, PNEUMATIC TOOLS
iBiotec NEUTRALÈNE® AL 30
EVAPORATION RATE 15 minutes at 20°C (zero air flow)
FLASHPOINT IN CLOSED CUP 30°C
iBiotec NEUTRALÈNE® AL 50
EVAPORATION RATE 30 minutes at 20°C (zero air flow)
FLASHPOINT IN CLOSED CUP 48°C
iBiotec NEUTRALÈNE® AL 66+
EVAPORATION RATE 45 minutes at 20°C (zero air flow)
FLASHPOINT IN CLOSED CUP 63°C
DESCRIPTION
Fully deodorized fluid especially suitable for any classic degreasing and decontamination operation in the field of metallurgy or plastics.
Excellent solvent of mineral or synthetic greases and oils. Also eliminates any organic or inorganic pollution (dust, metal cuttings, filings, etc.).
Contains no stabilizer. Does not corrode metals. Compatible with all metals and most plastics and elastomers.
Has a suitable evaporate rate for fast and effective cleaning: NEUTRALENE® AL 30, with its very low surface tension, can treat components with complex geometries or blind holes before evaporating completely.
That is how it completely eliminates dirt and leaves surfaces perfectly clean and residue-free.
APPLICATIONS
Usable cold: wiping with a cloth, soaking, using a brush, or vacuum cleaning.
Suitable for degreasing of mechanisms:
Degreasing of machined parts.
Degreasing of machine tool frames, chassis.
Cleaning of bearings, pinions, filters.
Industrial maintenance
Cleaning of injection moulds.
Cleaning after storage.
Surface preparation before assembly.
Fitting workshops, assembly workshops.
PHYSICO-CHEMICAL PROPERTIES
|
PROPERTIES |
STANDARDS |
VALUES AL 30 |
VALUES AL 50 |
VALUES AL 66 |
UNITS |
|
Appearance |
Visual |
Liquid |
Liquid | Liquid |
- |
|
Colour |
Visual |
Colourless |
Colourless | Colourless |
- |
|
Scent |
Olfactory |
Without |
Without |
Without |
- |
|
Density at 25°C |
NF EN ISO 12185 |
0,745 |
0,759 | 0,772 |
kg/m3 |
|
Refraction index |
ISO 5661 |
1,4130 |
1,4150 | 1,4250 |
- |
|
Freezing point |
ISO 3016 |
-20 |
-25 | -30 |
F |
|
Water solubility |
- |
0 |
0 | 0 |
% |
|
Kinematic viscosity at 40°C |
NF EN 3104 |
0,86 |
1,00 | 1,2 |
mm²/s |
|
Acid index |
EN 14104 |
<0,1 |
<0,1 | <0,1 |
mg(KOH)/g |
|
Iodine index |
NF EN 14111 |
<0,1 |
0,1 | 0,1 |
gI2/100g |
|
Water content |
NF ISO 6296 |
0,01 |
0,01 | 0,01 |
% |
|
Residue after evaporation |
NF T 30-084 |
0 |
0 | 0 |
% |
|
Steam pressure at 20°C |
NF EN 13016-1 |
>0,1 |
>0,1 | >0.1 |
hPa |
|
PERFORMANCE PROPERTIES |
|||||
|
PROPERTIES |
STANDARDS |
VALUES AL 30 |
VALUES AL 50 |
VALUES AL 66 |
UNITS |
|
Kauri Butanol index |
ASTM D 1133 |
45 |
46 | 45 |
- |
|
Evaporation speed |
- |
15 |
30 | 45 |
min. |
|
Surface tension at 20°C |
ISO 6295 |
24,7 |
24,4 | 25,3 |
dyne/cm |
|
Breakdown voltage |
NF EN 60156/IEC 156 |
60,000 |
63, 000 |
63 000 |
Volts |
|
Copper blade corrosion 100 h at 40°C |
ISO 2160 |
1a |
1a | 1a |
Measured value |
|
FIRE SAFETY PROPERTIES |
|||||
|
PROPERTIES |
STANDARDS |
VALUES AL 30 |
VALUES AL 50 |
VALUES AL 66 |
UNITS |
|
Flashpoint (closed cup) |
ISO 2719 |
30 |
50 | 66 |
°C |
|
Self-combustion point |
ASTM E 659 |
> 230 |
>230 | >230 |
°C |
|
Lower Explosive Limit |
NF EN 1839 |
0.6 |
0,6 | 0,9 |
% (volume) |
|
Upper Explosive Limit |
NF EN 1839 |
7.0 |
7.0 | 7,8 |
% (volume) |
|
TOXICOLOGICAL PROPERTIES |
|||||
|
PROPERTIES |
STANDARDS |
VALUES AL 30 |
VALUES AL 50 |
VALUES AL 66 |
UNITS |
|
Anisidine index |
NF ISO 6885 |
<1 |
<1 | <1 |
- |
|
Peroxide index |
NF ISO 3960 |
<1 |
<1 | <1 |
meq(O2)/kg |
|
TOTOX (anisidine index+2x peroxide index) |
- |
<1 |
<1 |
- |
|
|
CMR, irritant and corrosive substance content |
CLP Regulation |
0 |
0 | 0 |
% |
|
Residual methanol content from transesterification |
GC-MS |
0 |
0 | 0 |
% |
|
Emissions of hazardous compounds, CMR, irritants, corrosive at 160°C |
GC-MS |
0 |
0 | 0 |
% |
|
ENVIRONMENTAL PROPERTIES |
|||||
|
PROPERTIES |
STANDARDS |
VALUES AL 30 |
VALUES AL 50 |
VALUES AL 66 |
UNITS |
|
Biodegradability |
OECD 301 |
nm |
nm | nm |
- |
|
Steam pressure at 20°C |
- |
>0,1 |
>0,1 | >0,1 |
hPa |
|
VOC content (Volatile Organic Compounds) |
- |
100 |
100 | 100 |
% |
|
Sulphur content |
GC MS |
0 |
0 | 0 |
% |
|
Benzene content |
ASTM D6229 |
0 |
0 | 0 |
% |
|
Total halogen content |
GC MS |
|
% |
||
|
Chlorinated solvent content |
- |
0 |
0 | 0 |
% |
|
Aromatic solvent content |
- |
0.0 |
0.0 | 0,00 |
% |
|
Environmentally-hazardous substance content |
CLP Regulation |
0 |
0 | 0 |
% |
|
Content of compounds with GWP |
- |
0 |
0 | 0 |
% |
|
Content of compounds with ODP |
- |
0 |
0 | 0 |
% |
|
Carbon assessment, life cycles analysis. |
ISO 14040 |
nm |
nm | nm |
Kg carbon equivale |
|
ADDITIONAL PROPERTIES |
|||||
|
PROPERTIES |
STANDARDS |
VALUES AL 30 |
VALUES AL 50 |
VALUES AL 66 |
UNITS |
|
Heavy metals and metalloids content |
GC.MS | 0 | 0 | 0 | ppm |
|
Aniline point |
NF M 07.021 | 64 | 66 | 66 | °C |
|
Bromine number |
NF ISO 3839 | 5 | 4 | 4 | mg/100g |
PRESENTATIONS
|
IBC GRV 1000 L
|
Drum 200 L
|
Can 20 L
|
.jpg)
Product for the food industry (IAA)
Using an HACCP approach or method
Analysis of dangers and critical points to control them
ISO 22 000 CODEX ALIMENTARIUS
Category NSF:
K1 solvent: usable outside food manufacturing areas (the vapours must not enter the manufacturing area) to degrease equipment (e.g. conveyor bearings, maintenance of other mechanical components, etc.) used in manufacturing areas.
 |
 |
| Degreasing with rag | Degreasing with brush |
 |
|
| Solvent parts washers |
Looking for another product?
|
Discover our entire IAA range by clicking on the photo |
Manufacturing, lubrification, cleansing, protection,
IBiotec® Tec Industries® Service
offers a wide range of products reserved for industrial area
If you wish for :
a free sample
a technical advice
a product data sheet
a safety data sheet
IBiotec® Tec Industries®Service
manufacturer of technical chemical products.
Welcome to our website.
IBiotec® Tec Industries®Service is on : 